Principle of Superposition of Waves
When two waves propagating in the same medium interfere with each other the amplitude of the resultant of the two waves is the vector sum of the amplitude of the two waves, this is called the Principle of Superposition of Waves.
Waves are disturbances that transfer energy between two points without there being actual contact between the two points. We are completely surrounded by waves and these are used for performing a variety of tasks in our daily life.
We encounter different types of such as Radio waves, Light waves, Microwaves and others on a regular basis. The superposition of waves is the process of adding different waves together and finding their results.
In this article, we will learn about the Superposition of Waves and others in detail.
Table of Content
- What is Superposition of Waves?
- Principle of Superposition
- Types of Superposition of Waves
- Constructive Interference
- Destructive Interference
- Resultant Intensity in Interference of Two Waves
- What is Interference of Light?
- Solved Examples on Superposition of Waves
What is Superposition of Waves?
The concept of superposition of wave state that, “The resultant displacement of the waves in a medium formed by the number of individual waves is the vector sum of all the individual displacement formed by the individual waves at that point.”
Principle of Superposition
When two or more waves travel in the same medium, they are bound to interact with each other. They retain their wave nature after combining with each other, but usually, the resultant wave is different from both of the individual waves.
The superposition principle helps us describe the resulting wave or motion that is produced when two or more waves combine with each other.
The figure below shows two waves that are producing some displacement in the particles of the given medium.
In the figure given above, two waves with individual displacements y1 and y2 are given. Notice that the resultant wave from the superposition of these two waves has a greater displacement than the two individual waves.
The principles of superposition can be applied to any type of wave provided that:
- The waves that are superimposed are of the same type.
- The medium in which the waves are propagating behaves linearly, this means that the particles of the medium which are displaced with twice the displacement experience twice the amount of restoring force on them.
In the case of waves, the figure above shows two waves that are travelling in opposite directions. These waves produce equal displacements in the rope.
In mathematical terms, the superposition principle can be described as given below. Let’s say y1(x, t) and y2(x, t) is the displacements produced by two waves in the medium. Let P be the point where these two ways come and meet. Now using the principle of superposition to find the resultant displacement (y).
y = y1(x, t) + y2(x, t)
If two or more waves are travelling and meeting at one point in a medium and the wave functions for the individual waves are given by,
y = f1(x – vt)
y = f2(x – vt)
…
y = fn(x – vt)
The resultant wave after displacement is given by,
y = f1(x – vt) + f2(x – vt) + f3(x – vt) + …. fn(x – vt)
Types of Superposition of Waves
Generally, the superposition of waves is studied under two headings,
- Constructive Interference
- Destructive Interference
Constructive Interference
- Waves overlap in phase (crests and troughs align).
- Individual wave amplitudes add together.
- Resultant wave has a larger amplitude.
- Increases intensity or loudness of the resultant wave.
Let us consider two waves that are travelling at the same velocity. Since these two waves travel at the same velocity and meet at a particular point. Let’s analyze the resultant amplitude of the wave which originates after the superposition of these waves. Assuming that the equations for displacement produced by both the waves are the same and are given by,
y1 = acos(ωt)
y2 = acos(ωt)
Now using the principle of superposition to find the resultant displacement (y).
y = y1 + y2
y = acos(ωt) + acos(ωt)
y = 2acos(ωt)
It’s known that the intensity is proportional to the square of the amplitude. Since amplitude, in this case, becomes twice the original amplitude. The resulting intensity is given by
I = 4I0
where
I0 is the intensity of the original wave
Condition for Constructive Interference
We know that the Intensity of the resultant wave is given using the formula,
I = I1 + I2 +2√(I1I2)cosθ
For constructive Interference, I is the maximum which is possible if
cosθ = 1 , then θ = 0, 2π, 4π,…., 2nπ i.e.
Phase Difference is even multiple of π
Also,
- △x = λ/2π (θ)
- △x = λ/2π (2nπ)
△x = nλ
Thus, for Constructive Interference
- Phase Difference: 2nπ
- Path Difference: nλ
Destructive Interference
- Waves overlap out of phase (crests align with troughs).
- Individual wave amplitudes partially or completely cancel each other out.
- Resultant wave has a smaller amplitude.
- Decreases intensity or loudness of the resultant wave.
Let us consider two waves that are travelling at the same velocity. Since these two waves travel at the same velocity and meet at a particular point. Let’s analyze the resultant amplitude of the wave which originates after the superposition of these waves. Assuming that the equations for displacement produced by both the waves are the opposite this time and are given by,
y1 = acos(ωt)
y2 = acos(ωt + 3π)
y = y1 + y2
y = acos(ωt) + acos(ωt + 3π)
y = acos(ωt) – acos(ωt)
y = 0
So, this time two displacements in opposite directions resulted in zero amplitude and zero intensity. This is called destructive interference.
Note that the case of zero amplitude is only when the two waves are of the same amplitude but in opposite directions.
However, this is not mandatory case to have waves of the same amplitude. Hence, the below figure represents a general concept of destructive interference for waves of different amplitude and opposite directions.
Condition for Destructive Interference
We know that the Intensity of the resultant wave is given using the formula,
I = I1 + I2 +2√(I1I2)cosθ
For constructive Interference, I is the minimum which is possible if
cosθ = -1, then θ = π, 3π,…., (2n-1)π i.e.
Phase Difference is the odd multiple of π
Also,
△x = λ/2π (θ)
△x = λ/2π ((2n-1)π)
△x = (n – 1/2)λ
Thus, for Destructive Interference
- Phase Difference: (2n-1)π
- Path Difference: (n – 1/2)λ
Resultant Intensity in Interference of Two Waves
When two waves superimpose their resultant intensity can be easily calculated and to calculate their intensity let’s take an example.
Take two waves of displacements y1 and y2 that superimpose at point O in 3-D space and the phase difference between these two waves be “φ”. Now we can write the equation of wave y1 and y2 as,
y1 = a sin ωt
y2 = b sin ( ωt + φ)
where a and b are the amplitude of y1 and y2
The resultant displacement of the wave is given using the,
y = y1 + y2
y = a sin ωt + b sin (ωt + φ) . . . . . . . . . . (1)
y = a sin ωt + b sin ωt cos φ + b cos ωt sin φ
y = (a + b cos φ)sin ωt + b sin φcos ωt
Taking
(a + b cos φ) = A cosθ and b sin φ = A sinθ
y = A cosθ sin ωt + A sinθ cos ωt
y = A (cosθ sin ωt + sinθ cos ωt)
y = A sin(ωt + θ)
Now as,
(a + b cos φ) = A cosθ…(a)
b sin φ = A sinθ…(b)
Now adding and squaring eq. (a) and eq. (b)
(A cosθ)2 + (A sinθ)2 = (a + b cos φ)2 + (b sin φ)2
A2 (cos2θ + sin2θ) = a2 + b2 + 2absinφ
A = √(a2 + b2 + 2absinφ)…(c)
This is the formula for the amplitude of the resultant wave.
Also, Dividing eq.(b) by eq.(a)
tan θ = (b sin φ)/(a + b cos φ)…(d)
We know that,
I = KA2
where
I is the intensity of the wave
A is the amplitude of the wave
From (c) we get,
I = I1 + I2 +2√(I1I2)cosθ
What is Interference of Light?
When two or more light rays interact at some point the resultant wave so formed is called the superimposed wave. These superimposed waves have maximum intensity and maximum amplitude at some points and minimum intensity and minimum amplitude at some other points. This phenomenon is called the Interference of Light
Read More,
Solved Examples on Superposition of Waves
Example 1: Two waves travelling in a medium are given by the following equations,
y1 = 2acos(ωt)
y2 = 2acos(ωt + π)
Find the resulting amplitude after their superposition.
Solution:
y = 2acos(ωt) + 2acos(ωt + π)
y = 2acos(ωt) – 2acos(ωt)
y = 0
The resulting amplitude becomes zero.
Example 2: Two waves travelling in a medium are given by the following equations,
y1 = acos(0.5ωt)
y2 = acos(0.5ωt + 2π)
Find the resulting amplitude after their superposition.
Solution:
y = acos(0.5ωt) + acos(0.5ωt + 2π)
y = acos(0.5ωt) + acos(0.5ωt)
y = 2acos(0.5ωt)
The resulting amplitude becomes “2a”.
Superposition of Waves – FAQs
What is Superposition of waves?
When two waves travelling in a similar medium interact their resultant displacement is the vector sum of their individual displacement at that point.
What is Superposition of Waves Formula?
The superposition of wave formula state that for two waves y1 and y2 when they interact their resultant wave is given using the formula,
y1 = a sin ωt
y2 = b sin ( ωt + φ)Resultant (y) = A sin(ωt + θ)
where
A = √(a2 + b2 + 2absinφ)
What are Nodes and Antinodes?
The highs made by the waves while propagating are called the Nodes whereas the lows made by the waves while propagating are called the Antinodes
What is Constructive Interference?
If the two waves in the same phase interact the interference pattern formed by them is called constructive interference. In constructive interference, the amplitude and the intensity of the superimposed wave is the highest.
What is Destructive Interference?
If the two waves in the opposite phase interact the interference pattern formed by them is called destructive interference. In destructive interference, the amplitude and the intensity of the superimposed wave is the lowest.
What happens when waves superpose?
When waves superpose, their displacements at each point add together. This can result in either constructive interference, where amplitudes add, or destructive interference, where amplitudes cancel each other out.
How does superposition affect wave intensity?
Superposition can increase or decrease wave intensity depending on whether constructive or destructive interference occurs, respectively. Constructive interference increases intensity, while destructive interference decreases intensity.
What are some examples of superposition of waves?
Examples include interference patterns in water waves, light waves, and sound waves, as well as phenomena like beats in music and standing waves in strings or air columns.
How does superposition relate to wave behavior?
Superposition is fundamental to understanding wave behavior, including phenomena like reflection, diffraction, and resonance. It explains how waves interact with each other and with obstacles or boundaries.
Can waves of different frequencies superpose?
Yes, waves of different frequencies can superpose. When waves of different frequencies overlap, they can still exhibit constructive or destructive interference depending on their relative phase.
How is superposition used in practical applications?
Superposition is used in various applications, such as in noise-canceling headphones, where destructive interference is used to cancel unwanted sounds, and in radio transmission, where multiple signals can be transmitted simultaneously without interference.
How can I understand superposition better?
To understand superposition better, study its mathematical principles, experiment with wave simulations or demonstrations, and solve practice problems or experiments involving interference.