How to Repair Windows Common Errors Only With CMD?

On Windows, you will get a lot of Common Problems that can cause issues at any time on your device. However, with the Windows Command Prompt, you can easily fix them.

You have to execute some Windows Commands on the Windows Command Line Tool that will quickly Resolve Windows Common Issues. This article will highlight all the methods to Repair Windows Common Errors with Command Prompt Only.

Before moving ahead with the demonstration of Windows Commands executed on the Windows Command Prompt to Resolve Common Windows Issues, it is time to discuss some of the best practices with CMD. You must remember these points before implementing the Commands on Windows.

• Always Run in Administrator: If you make any changes on Windows OS, ensure the Command Prompt is executed in the Administrative Format. As in that case only, the Command Prompt can make necessary changes. Otherwise, the command executed will not impact the device.
• Put Proper Command: Oftentimes, users put the command wrong in the Command Prompt. This might cause Wrong Command Execution or sometimes, an error message comes on the Command Window. So, recheck the Syntax of Windows Command, before entering into the system.
• Backup Important Data: It is always necessary to backup the data to another device. If the device has encountered some fatal problems, it might be possible that the Windows gets completely shut down. And your important data has been lost forever. So, it will be better to always have a backup.

To Fix Windows Common Errors Only with Command Prompt, the following guidelines should be used. Here, we have demonstrated the Most Important Windows Commands executed on the Command Prompt.

Method 1: Repair Windows Errors on CMD with CHKDSK Command

Note: The CHKDSK is the Windows Command that is executed on the Disk & Drivers. It checks whether the Disk or Driver is working properly or not. You can get the Boot Errors on Windows for the same reason.

Open the Command Prompt on Windows & execute the CHKDSK Command as the following. It will check the certain Windows Driver issues.

Command: chkdsk <Drive Name> /f

Method 2: Repair Windows Errors on CMD with DISM Command

Note: The Deployment Image Servicing and Management or DISM Command can be executed on the Windows Image Files. If these files are not responsive, then the DISM is executed to check the issue.

Open the Command Prompt in the Administrative Format. The DISM Command should be executed in the following manner. It will check & restore the health of the files.

Command: DISM /Online /Cleanup-Image /RestoreHealth

Method 3: Repair Windows Errors on CMD with SFC Command

Note: The System File Checker or SFC Command can be used on any kind of Windows System File. If the Windows has any corrupted file, then you have to execute it & all the scanning will be done.

On the CMD of Windows, the SFC Command is executed as per the following. Use the proper syntax of the command.

Command: sfc /scannow

Method 4: Repair Windows Errors on CMD with BCD Command

Note: The Boot Configuration Data or BCD is the command that can be executed on Windows whenever there is any problem with the Windows Booting.

On the Command Prompt, the BCD Command can be executed as like the following. This command will check all booting problems & then it will rebuild the solution.

Command: bootrec /rebuildbcd

Method 5: Repair Windows Errors on CMD with NET Command (Windows Update)

Note: Another important Common Windows Issue related to Windows Update. The NET Command is used to Reset Windows Update problem. You have to Stop Windows Update & Restart it with NET Command.

Step 1: On the Command Prompt, use the following NET Command. This command is going to Turn Off Windows Update.

Command: net stop wuauserv

Step 2: Now, it is time to Restart Windows Update. To do so, we have to use another version of NET Command. The following command will start the Windows Update Service.

Command: net start appidsvc

From the above discussion, we can say Fixing Common Windows Errors with Command Prompt is not a complicated task. You have to just understand the Windows Issues & based upon that the Windows Executable Command can be used. You have to be very careful while using Windows Commands on Command Prompt.

How to Repair Windows Common Errors Only With CMD?

There are a lot of Common Windows Problems are present that can be solved with the Windows Command Prompt. In case you have a Corrupt Disk or Driver use the CHKDSK Command, to fix Boot Problems use the BCD Command, Fix Corrupted System Files the SFC & DISM Commands can be used at the same time.

What is CMD on Windows?

The Command Prompt of CMD is the Command Line Interface Tool that can be executed with some specific commands. Like Terminal in Linux, the Command Prompt can be used on Windows. However, it is not termed as the Terminal of Windows. The Powershell is termed the Windows Terminal as it looks more similar.

What are the points to keep in mind while using Windows CMD?

While you are using the Windows Command Prompt, you have to keep some points in mind. You have to make sure that the Windows Command Prompt is executing in the Administrative Format. Also, you have to put the Windows Commands properly without making any mistakes. You also have a backup of important files on Windows.