How to Repair Windows Common Errors Only With CMD?

To Fix Windows Common Errors Only with Command Prompt, the following guidelines should be used. Here, we have demonstrated the Most Important Windows Commands executed on the Command Prompt.

Method 1: Repair Windows Errors on CMD with CHKDSK Command

Note: The CHKDSK is the Windows Command that is executed on the Disk & Drivers. It checks whether the Disk or Driver is working properly or not. You can get the Boot Errors on Windows for the same reason.

Open the Command Prompt on Windows & execute the CHKDSK Command as the following. It will check the certain Windows Driver issues.

Command: chkdsk <Drive Name> /f

Method 2: Repair Windows Errors on CMD with DISM Command

Note: The Deployment Image Servicing and Management or DISM Command can be executed on the Windows Image Files. If these files are not responsive, then the DISM is executed to check the issue.

Open the Command Prompt in the Administrative Format. The DISM Command should be executed in the following manner. It will check & restore the health of the files.

Command: DISM /Online /Cleanup-Image /RestoreHealth

Method 3: Repair Windows Errors on CMD with SFC Command

Note: The System File Checker or SFC Command can be used on any kind of Windows System File. If the Windows has any corrupted file, then you have to execute it & all the scanning will be done.

On the CMD of Windows, the SFC Command is executed as per the following. Use the proper syntax of the command.

Command: sfc /scannow

Method 4: Repair Windows Errors on CMD with BCD Command

Note: The Boot Configuration Data or BCD is the command that can be executed on Windows whenever there is any problem with the Windows Booting.

On the Command Prompt, the BCD Command can be executed as like the following. This command will check all booting problems & then it will rebuild the solution.

Command: bootrec /rebuildbcd

Method 5: Repair Windows Errors on CMD with NET Command (Windows Update)

Note: Another important Common Windows Issue related to Windows Update. The NET Command is used to Reset Windows Update problem. You have to Stop Windows Update & Restart it with NET Command.

Step 1: On the Command Prompt, use the following NET Command. This command is going to Turn Off Windows Update.

Command: net stop wuauserv

Step 2: Now, it is time to Restart Windows Update. To do so, we have to use another version of NET Command. The following command will start the Windows Update Service.

Command: net start appidsvc

From the above discussion, we can say Fixing Common Windows Errors with Command Prompt is not a complicated task. You have to just understand the Windows Issues & based upon that the Windows Executable Command can be used. You have to be very careful while using Windows Commands on Command Prompt.

On Windows, you will get a lot of Common Problems that can cause issues at any time on your device. However, with the Windows Command Prompt, you can easily fix them.

You have to execute some Windows Commands on the Windows Command Line Tool that will quickly Resolve Windows Common Issues. This article will highlight all the methods to Repair Windows Common Errors with Command Prompt Only.