Flush DNS and Reset Winsock to fix IPv6 No Internet Access
Step 1: Open Command Prompt as Administrator
Right-click on the Start menu, and choose “Command Prompt (Admin).“
Step 2: Flush DNS
Type ipconfig /flushdns and press Enter.
Step 3: Reset Winsock
Type netsh winsock reset and press Enter.
Step 4: Restart
Restart your computer to apply the changes made through Command Prompt.
How to Fix IPv6 No Internet Access Issue in Windows?
This “IPv4/IPv6 No Network Access” is a difficult problem that many people are annoyed with. Identifying the cause is important if a problem is to be resolved well. There are numerous possible causes behind the problem. It could be that the user has misconfigured some items in the operating system, or their equipment might have failed, or there could be a breakdown in the network that connects with their system.
This article is on the IPv6 No Internet Access error. Here, we discuss the main causes of the problem and how you can get back to normal access.
Table of Content
- Method 1: Check Network Cables and Connections to fix IPv6 No Internet Access
- Method 2: Restart Your Router to fix IPv6 No Internet Access
- Method 3: Update Network Drivers to fix IPv6 No Internet Access
- Method 4: Flush DNS and Reset Winsock to fix IPv6 No Internet Access
- Method 5: Disable and Re-enable IPv6 to fix IPv6 No Internet Access
- Method 6: Check for ISP IPv6 Support to fix IPv6 No Internet Access
- Method 7: Reset TCP/IP Stack to fix IPv6 No Internet Access