OSPF Maximum Paths command OSPF Maximum Paths : Configuring OSPF Maximum Paths : R1(config-router)#maximum-paths <1-16> Configuring OSPF Maximum Paths Pre-requisite: Open Shortest Path First (OSPF) Protocol fundamentals, Open shortest path first (OSPF) router roles and configuration Similar Reads OSPF Maximum Paths : Open Shortest Path First (OSPF) does equal cost load balancing. It is used to perform dynamic routing by exchanging routing table information using LSAs within a single Autonomous System (AS) in a network. And if you have multiple routes with equal cost paths to the same destination, then OSPF will do load sharing. OSPF allows entry of up to 4 multiple paths of a single network with identical metrics by default, and can be increased to a maximum of 16 paths and a minimum of 1 path. Default settings and range of Maximum-paths vary depending on router platform/model.... OSPF Maximum Paths command : R1(config-router)#maximum-paths <1-16>... Configuring OSPF Maximum Paths : Step 1: Create the physical topology in GNS3 as shown in the image below :... Tags: #CCNA Routing #Technical Scripter 2022 #CCNA #Technical Scripter OSPF Maximum Paths : Configuring OSPF Maximum Paths :