Haber-Process of Ammonia

In Haber Process of Ammonia, methane and water undergo reactions internally to generate hydrogen. Later, oxygen and nitrogen gas are introduced, initiating another process that generates additional hydrogen from methane. In both reactions, carbon monoxide forms as a by-product.

The components of ammonia N2 and H2 combine in a ratio of 1:3.

N2(g) + 3H2(g) ⇌ 2NH3(g) with ΔH = −92.4kJ/mol

After that water vapor is introduced, leading to the oxidation of carbon monoxide to carbon dioxide. The produced carbon dioxide exits the system, leaving behind a gas mixture of nitrogen and hydrogen. This mixture undergoes compression at 200 atmospheres and is heated at approximately 500°C. The heated and pressurized mixture then enters the reaction chamber and then put a metal catalyst (Iron) with small amounts of K2O and Al2O3 to increase the rate of attainment of equilibrium. Ammonia is formed in this stage, and the reaction mixture is distilled by passing a cold water jacket over it. This ammonia gas goes for liquefaction, which is drained from the system.

Initially, only around 15% of the nitrogen and hydrogen undergo reaction. The unreacted gas separates from the liquid ammonia and goes back to the reaction chamber. Through further runs, approximately 98% of the original gas mixture eventually reacts to produce ammonia.

Haber’s Process

Haber’s Process, which is also called the Haber-Bosch process, is used in the synthesis of ammonia from nitrogen and hydrogen. The Haber process to produce ammonia was developed during World War 1 (1914-1918) by a German chemist named Fritz Haber and his assistant in a laboratory. Later, in 1910, Carl Bosch took this idea and created a large-scale industrial machine for ammonia production.

In this article, we will learn What is Haber Process, the Diagram of Haber Process, equations, and thermodynamics involved in Haber’s Process.

Table of Content

  • What is Haber’s Process?
  • Raw Materials Used in Haber-Process
  • Haber Process Diagram
  • Haber Process Condition
  • Thermodynamics of Haber Process
  • Reaction Rate and Equilibrium of Haber’s Process

Similar Reads

What is Haber’s Process?

Haber Process is the industrial process for the manufacturing of Ammonia from hydrogen and nitrogen. Hydrogen is obtained from the reaction of methane and steam, producing carbon monoxide as a by-product. The hydrogen produced from this reaction also reacts with oxygen from air, producing water and leaving nitrogen behind. These gases are then compressed and delivered to the reactor where ammonia is produced. These gases are then cooled down, and ammonia is liquefied, ready to be tapped off. Unused hydrogen and nitrogen are recycled back to the reactor....

Raw Materials Used in Haber-Process

The Haber-Process utilizes the following raw materials:...

Haber Process Diagram

The Haber-Process diagram involves several stages:...

Haber Process Condition

The Haber Process happens with high pressure, high temperature, and the presence of a catalyst. These conditions are necessary for conducting the reaction and ensuring the efficient production of a sufficient quantity of ammonia....

Thermodynamics of Haber Process

Whether a catalyst is present or not, the production of ammonia in the Haber-Process is a spontaneous reaction (∆G < 0). There is need to notice that the kinetics and thermodynamics of a reaction are often independent, meaning a thermodynamically favourable reaction might not necessarily be faster. The Haber-Process is an example of this, showing a reaction with favourable thermodynamics but slow kinetics....

Reaction Rate and Equilibrium of Haber’s Process

The Haber-Process is necessary for synthesizing ammonia through the reaction of nitrogen and hydrogen. This reaction is reversible reaction and that the forward reaction is exothermic involving the release of energy:...

Haber-Process of Ammonia

In Haber Process of Ammonia, methane and water undergo reactions internally to generate hydrogen. Later, oxygen and nitrogen gas are introduced, initiating another process that generates additional hydrogen from methane. In both reactions, carbon monoxide forms as a by-product....

Uses of Ammonia

The applications of ammonia are mentioned below:...

Haber-Process Sample Questions

Q1: What are the factors that influence the Haber-Process?...

Practice Questions on Haber-Process

Q1. Describe the role of a catalyst in the Haber-Process....

FAQs on Haber’s Process

1. What is Haber Process?...